Phone: 0086 15267018188 Email: 229609468@qq.com

OY-GN06K

Home / Our Product / Detail

..
..
  • ..

OY-GN06K

Primary sockets no. 1&2 can be set to "operate through remote control" or to be "always on". Turning mode selector switch no. a & b towards arrow direction can respectively set sockets no. 1 & 2 to be "always on" for the appliances which need continuous power supply. For example we recommend the Television in the "always on" mode for these primary sockets.
This is the description of OY-GN06K
OY-GN06K Instruction

Primary sockets no. 1&2 can be set to "operate through remote control" or to be "always on". Turning mode selector switch no. a & b towards arrow direction can respectively set sockets no. 1 & 2 to be "always on" for the appliances which need continuous power supply. For example we recommend the Television in the "always on" mode for these primary sockets.
Secondary sockets no. 3. 4, 5 & 6 are always operated through remote control. These should be used for appliances which do not need to be on all the time一For example we recommend DVD player, Audio system etc for these secondary sockets.
Technical Data
Rated current:16A Rated voltage:250V Maximum power:3000 watt

Attention:
The interval between two times of pressing the remote control must be five seconds or more ,in case of any damage an the relay一Otherwise it will not work

 

Overload protection: It will cut the power automatically when the power load of the standby killer is mare than its maximum capacity 2200 watt
Optional made socket:The appliances that need to be on permanently should be plugged into the two sockets on the left,with the optional mode switch in the "on" position.These sockets can alternatively be used as slave sockets by shifting the optional made switch to the "slave" position.
Status light : It will indicate if the standby killer is power on and show the status of the standby power learning process

Note: The standby killer's default power to switch off the appliance (control appliance) pluggd into the master socket is 20 watt.
If the standby power of the control appliance is less than 20 Watt, you can simply follow the above set-up process from step 1 to step 6.
If the working power of your control appliance is less than 20 Watt ,or standby power is more than 20 watt.you should follow below steps to set up your standby killer to learn its real standby power.
1:Follow the step 5 and step 6 to turn on the TV to make it on normal play status, then press the learning button,and the status light will flicker (about l time per second).
2: Press the on/off button an your remote control to switch the TV to the standby made when the status light is flickering, then press the learning button again,the status light will turn to quick flickering[about 2 times per second) .After quick flickering for 10 seconds,the power of the
standby killer is cut. The status light goes out, indicating that your standby killer has learnt the real standby power of the control appliance.
3: Simply follow the set-up process from the first step after succeeding in learning the standby power.

Related Products

s

OY-AT06K

OY-DT03K

OY-DT03K

OY-MT04K

OY-MT04K

OY-DP05K

OY-DP05K

OY-FT03K

OY-FT03K

OY-GN06K

OY-GN06K

Inquiry

Meeting customer needs is our only goal and motivation

We offer the best quality, the best service and the fastest response, just to reassure the customers